
A-Pillar Speaker Pods for 4in 07-14 GMFST
-Finish off your 3-way component setup with our A-pillar tweeter pods.
-Fits Tahoe, Suburban, Escalade, Yukon, Silverado, Sierra and Avalanche.
- 2007-2014 Chevrolet Tahoe, Suburban, Silverado, Avalanche 2007-2014 GMC Yukon, Yukon XL, Denali, Sierra 2007-2014 Cadillac Escalade
Specs:
- 4" Speaker Mounting Face Diameter: 4.3"
- Cutout Diameter: 3.5"
- Bolt circle: 4.3"
- Speaker Mounting Depth: ~3.5"
- Tweeter Mounting Face Diameter: 2.2"
- Cutout Diameter: 1.5"
- Speaker Mounting Depth: 2.5"
- Color: Textured Black
- 4" Speaker Mounting Face Diameter: 4.3"
-These pods have been digitally designed to aim the speakers 6" in front of the center dash.
-Pods will support up to a 4" midrange, plus a 1.5"-2" tweeter.
- Create a custom look without the use of fiberglass or bondo. Save money by doing it yourself, or have your stereo installer put them in for you.
- These pods come as a set (passenger and driver included when ordering quantity 1).
- Pods are made from durable 1/8" ABS plastic.
- Pods are shipped black, but can be painted to match your interior using SEM Classic coat, or any other spray paint.
- They include hardware for mounting to the door panel.
- Speakers not included.
Installation tools required:
-
Pencil/Marker
-
Drill with 3/16" drill bit.
-
Rotary tool with cutting style bit (ex. Rotozip) or similar.
-
Phillips Screwdriver
-
9mm / 11/32" wrench.
-
Utility knife
Basic installation procedure:
-
Remove A-pillar cover from vehicle.
-
Locate the speaker pod onto the cover, ensuring that the pod sits securely.
-
Mark all mounting holes.
-
Test fit speaker and mark area on pillar cover that needs to be removed to allow speaker to fit flat onto speaker pod.
-
Remove speaker pod, drill mounting holes, cut speaker openings.
-
Install pod using supplied hardware. Do not overtighten screws! Overtightening can damage the pod or door panel.
-
Install speakers to pod: Speakers can be mounted directly to the speaker pod. Place speaker, mark mounting holes. Using the appropriate sized drill bit, pre-drill mounting holes. Place speaker and install screws.
-
Re-install Pillar cover.
-